planarrf.com
planarrf.com
  • Home
  • Products
    • Absorbing Clamps
    • Antenna Kits
    • Antenna Masts
    • Antennas
    • CDNs
    • Comb Generators
    • Conducted Immunity Test
    • Discontinued Products
    • EM Clamps
    • Near Field Probes
    • ISNs
    • Line Impedance Stabilizat
    • Magnetic Field Generator
    • Feed Through Capacitor
    • Power Amplifiers
    • Pre-compliance Emissions
    • Preamplifiers
    • RF Current & BCI Probes
    • Spectrum Analyzers
    • Surge Generators
    • System Controllers
    • Transient Limiters
    • Tripods For EMC
    • Turntables
    • Microwaves components
    • Beamformers
    • Cable Assemblies
    • Bulk Cables
  • Calibration
  • Contact Us
  • More
    • Home
    • Products
      • Absorbing Clamps
      • Antenna Kits
      • Antenna Masts
      • Antennas
      • CDNs
      • Comb Generators
      • Conducted Immunity Test
      • Discontinued Products
      • EM Clamps
      • Near Field Probes
      • ISNs
      • Line Impedance Stabilizat
      • Magnetic Field Generator
      • Feed Through Capacitor
      • Power Amplifiers
      • Pre-compliance Emissions
      • Preamplifiers
      • RF Current & BCI Probes
      • Spectrum Analyzers
      • Surge Generators
      • System Controllers
      • Transient Limiters
      • Tripods For EMC
      • Turntables
      • Microwaves components
      • Beamformers
      • Cable Assemblies
      • Bulk Cables
    • Calibration
    • Contact Us
  • Sign In
  • Create Account

  • My Account
  • Signed in as:

  • filler@godaddy.com


  • My Account
  • Sign out

Signed in as:

filler@godaddy.com

  • Home
  • Products
    • Absorbing Clamps
    • Antenna Kits
    • Antenna Masts
    • Antennas
    • CDNs
    • Comb Generators
    • Conducted Immunity Test
    • Discontinued Products
    • EM Clamps
    • Near Field Probes
    • ISNs
    • Line Impedance Stabilizat
    • Magnetic Field Generator
    • Feed Through Capacitor
    • Power Amplifiers
    • Pre-compliance Emissions
    • Preamplifiers
    • RF Current & BCI Probes
    • Spectrum Analyzers
    • Surge Generators
    • System Controllers
    • Transient Limiters
    • Tripods For EMC
    • Turntables
    • Microwaves components
    • Beamformers
    • Cable Assemblies
    • Bulk Cables
  • Calibration
  • Contact Us

Account


  • My Account
  • Sign out


  • Sign In
  • My Account

Line Impedance Stabilization Network

Line Impedance Stabilization Network

We offer a wide range of Line Impedance Stabilization Networks (LISNs) for conducted emission testing , adhering to widely accepted EMC specifications such as CISPR, FCC, ISO, EN, RTCA DO-160, and MIL-STD 461D.

Single Phase LISN

Com-Power The LISNs can be used with single phase power sources with one set of LISNs and also three phase power sources (requires two sets of LISNs).

LI-1100C

 The LI-1100 Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with CISPR 16-1-2 and ANSI C63.4. It provides defined stable impedance and isolates the EUT from power source influences, providing accurate and repeatable results.  

LI-125C

 The LI-125C Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with CISPR 16-1-2 and ANSI C63.4. It provides defined stable impedance and isolates the EUT from power source influences.  

LI-150C

 The Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with CISPR 16-1-2 and ANSI C63.4. It provides defined stable impedance and isolates the EUT from power source influences for accurate results.  

LI-220C

 The LI-3100 is a Line Impedance Stabilization Network (LISN) model that can handle up to 100 Amps AC current and is used for power line emissions compliance testing, providing a defined impedance, a coaxial RF measurement port, and isolation from ancilliary equipment.  

LI-3100

 The LI-3100 Line Impedance Stabilization Network (LISN) model is a measurement platform for power line emissions compliance testing, capable of handling up to 100 Amps AC current and providing a defined impedance, a coaxial RF measurement port, and isolation from ancilliary equipment  .

LI-325C

 The LI-325C Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with RTCA DO-160, MIL-STD 461, CISPR 25, and CISPR 16-1-2 standards. It provides defined stable impedance and isolates the EUT from power source influences, providing accurate and repeatable results. The LISN uses air-core inductors to prevent saturation and permeability variation, and is individually calibrated for compliance with relevant standards.  

LI-350

 The LI-350 Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with RTCA DO-160 and MIL-STD 461F standards. It connects in series with lines, imposes defined impedance, provides a coaxial RF measurement port, and isolates the ancillary equipment port, minimizing the influence of equipment on the network and reducing the amplitude of ambient signals. It can accommodate 3-phase power systems.  

LI-400C

  a measurement platform for power line emissions compliance testing, compliant with MIL-STD 461. It provides defined stable impedance and isolates the EUT from power source influences, ensuring accurate and repeatable results. The LI-400C includes one pair of single-conductor networks, one for single-phase, dual-phase, or DC power systems, and a second pair for 3-phase systems. It uses Superior Electric SUPERCON® shrouded sockets and air-core inductors for protection.  

LI-4100

 The LI-4100 Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, capable of handling up to 100 Amps AC current. It provides a defined impedance on lines, a coaxial RF measurement port, and isolates the ancilliary equipment port from the EUT and RF ports, minimizing the influence of AE-connected equipment on the network and reducing ambient signals and spurious disturbance voltages.  

LI-550C - For CISPR 25, CISPR 16 Compliant

 The LI-550C Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with CISPR 25 and CISPR 16-1-2. It provides defined stable impedance and isolates the EUT from power source influences, ensuring accurate and repeatable results. The LISN includes one pair of single-conductor networks, Superior Electric SUPERCON® shrouded sockets, and color-coded plugs. It uses air-core inductors for protection.  

LIN-120C

 The LIN-120C Line Impedance Stabilization Network (LISN) is a measurement platform for power line emissions compliance testing, compliant with CISPR 16-1-2 and ANSI C63.4. It provides defined stable impedance and isolates the EUT from power source influences, ensuring accurate and repeatable results. The LIN-120C includes one pair of single-conductor networks for single-phase, dual-phase, or DC power systems, and a second pair for 3-phase systems.  

Three Phase LISN

Com-Power three-phase LISN 3P Series consists of 12 separate models of four conductor, 50Ω, 50 μH Line Impedance Stabilization Networks (LISNs). For CISPR 16-1-2, ANSI C63.4, and MIL-STD 461.

LI-3P-1X

 The LI-3P-1x series consists of four four-conductor, 50Ω / 50 μH Line Impedance Stabilization Networks (LISNs) with different ratings. These LISNs can be operated remotely or locally, with remote switching using the RLI-100 Remote LISN Interface or selecting the line using a mechanical four-position switch. The selected line is terminated by the measuring instrument's 50-ohm impedance.  

LI-3P-2X

 The LI-3P-2X series consists of four four-conductor, 50Ω / 50 μH Line Impedance Stabilization Networks (LISNs) with a frequency range of 9 kHz to 30 MHz. These LISNs have different current ratings and can be operated remotely or locally. The side panels are louvered for cooling purposes, and the LI-3P-263 and LI-3P-2100 have internal cooling fans. Lines not selected are internally terminated into 50 ohms.  

LI-3P-4X

 The LI-3P-4x Series comprises four four-conductor Line Impedance Stabilization Networks (LISNs) with varying current ratings. These LISNs are used for power line conducted emissions compliance testing, providing a stable power line impedance, isolating the Equipment Under Test (EUT), and coupling disturbance voltages to the coaxial measurement port. They use air-core inductors, unpainted mounting plates, louvered side panels, and internal cooling fans.  

Copyright © 2025 planarrf.com - All Rights Reserved.

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

Accept